TENSIONER FIXED - ADJUSTABLE 6.5 HOLE
ZORIENT
Tensioners
Description
Product Code: ZORIENT
Description: 6.5mm Mounting Hole Bare Aluminum Adjustable Directional Tensioner Base, lever, Both With Serration's
Number Pieces: 1
Brand: Zetasassi
Specs:
Newton:
Temperature: -50 to +230C
Materials
Body & Arm: Aluminum alloy (440 MPa)
Elements: Nil
Dimensions.
Hole In Arm Diameter: 6.5mm
Mounting Hole Diameter: 10.5mm
Base Width: 60mm
Base Length: 80mm
Total Height: 38mm
Total Length: 135mm
Total Width: 60mm
Lever Length From Centre to Centre: 70mm
Adjusting Angle: Lever is 15 degrees per slot, plus the base slot is 60 degrees .
Notes:
A manually adjustable tensioner consisting of a lever and base made of high quality aluminum (440MPa). Both parts have cogged faces. Units can be manually adjusted. Can take a variety of different tensioning attachments. Base has a slot to block rotation of body.
The directional tensioner ORIENT works like a fixed device, so it contains no spiral springs or elastomers. The absence of synthetic materials enables ORIENT to function at high temperatures.
It peculiarity lies in the fact that it can be given any orientation you wish, either before or after installation, when the slack of the belt or chain requires correction of the tensioning.
This is possible thanks to a sprocket on the base of the lever that makes it possible to assemble the two parts at every 15 degrees of rotation for all 360 degrees available. This means 24 positions between base and lever, plus an adjustment slot that also prevents rotation of the product.
The base and lever are produced in rugged aluminium alloy with tensile strength of 440MPa.
The base has 6 threaded holes for directional fastening to the lever, a central hole and an adjustment and antirotation slot for positioning and fastening it on the frame or plate where the element is housed.
The lever has 8 holes for variable fastening to the base and one hole for installation of various accessories. Every 15 degrestwo holes of the base coincide with the holes on the lever, and the two parts are fastened together with two screws. This characteristic makes the product versatile and adaptable to a wide range of applications and offers numerous solutions to problems of size and positioning.
For adjustment of the product, a hexagon for a 22 mm wrench is provided at the center of the base. It is sufficient to release the antirotation slot and turn the product to reset the transmission tension. If that does not suffice, move the sprocket to the next position between the lever and the base.
It is an excellent alternative for those who do not need an automatic tensioner but, at the same time, have problems of size and positioning on the machine.
Questions?
You may also like
TENSIONER BODY + ARM 10.5 HOLE 10-120N
