THREAD REPAIR KIT M18 x 2.5 POWERCOIL
3520-18.00K
Thread Repair
Description
Product Code: 3520-18K
Description: 18mm x 2.50mm Powercoil Repair Kit
Number Pieces: 7
Brand: PowerCoil
Specs:
Size: 18mm
Thread Pitch: 2.5mm
Inserts Per Kit: 5
Tapping Drill not included
Contains:
HSS Intermediate STI Tap
Wire Thread Inserts x 5
Hand Installation Tool
Instructions
Notes:
Everything you need for complete thread repair in one handy case.
Includes only the best quality HSS Taps which make them suitable for aluminium, magnesium, cast iron and most machinable steels.
Provides a strong female thread.
Available in most thread forms.
Available in varying lengths.
Manufactured in 304 stainless steel.
Also known as POWERCOIL and HELICOIL
Kit includes Installation Tools, Tap and Inserts
Instructions:
1. DRILL - Drill to clear out the damaged thread with drill size as specified on kit (if necessary)
2. CHECK - Ensure the tap thread matches the bolt thread.
3. TAP - Tap thread carefully using correct procedures.
4. SET TOOL - Place insert on installation tool, positioning the adjustable stop so that the inset tang is centered in the tang slot.
5. INSTALL - Wind insert in with light downward pressure until 1/4 - 1/2 turn below the surface.
6. TANG REMOVAL - Do not attempt to twist tang off with tool. Lift tool from tang, turn tool 90 degrees and tap down sharply. Use tang break off tool where supplied. For sparkplug and large fine threads, use long nosed pliers to pull tang out
Questions?
You may also like
THREAD REPAIR INSERT UNF 1/2-20 x 1.5D POWERCOIL